manualshive.com logo in svg

Texas Instruments Sitara AM335x, Manual

The Texas Instruments Sitara AM335x is a high-performance processor designed for embedded applications. To help users get started quickly, we offer a free Quick Start Manual for download, providing comprehensive instructions and guidance. Unlock the full potential of your device by accessing this valuable resource at manualshive.com.

Share
Download
background image

AM3359, AM3358, AM3357, AM3356, AM3354, AM3352

www.ti.com

SPRS717H – OCTOBER 2011 – REVISED MAY 2015

(1) An internal 10 kohm pull up is turned on when the oscillator is diasabled. The oscillator is disabled by default after power is applied.

(2) An internal 15 kohm pull down is turned on when the oscillator is disabled. The oscillator is enabled by default after power is applied.

(3) Do not connect anything to this terminal.

(4) If sysboot[5] is low on the rising edge of PWRONRSTn, this terminal has an internal pull-down turned on after reset is released. If sysboot[5] is high on the rising edge or PWRONRSTn,

this terminal will initially be driven low after reset is released then it begins to toggle at the same frequency of the XTALIN terminal.

(5) LCD_DATA[15:0] terminals are respectively SYSBOOT[15:0] inputs, latched on the rising edge of PWRONRSTn.

(6) Mode1 and Mode2 signal assignments for this terminal are only available with silicon revision 2.0 or newer devices.

(7) Mode2 signal assignment for this terminal is only available with silicon revision 2.0 or newer devices.

(8) Refer to the External Warm Reset section of the AM335x Technical Reference Manual for more information related to the operation of this terminal.

(9) Reset Release Mode = 7 if sysboot[5] is low. Mode = 3 if sysboot[5] is high.

(10) Silicon revision 1.0 devices only provide the MMC2_DAT7 signal when Mode3 is selected. Silicon revision 2.0 and newer devices implement another level of pin multiplexing which

provides the original MMC2_DAT7 signal or RMII2_CRS_DV signal when Mode3 is selected. This new level of of pin multiplexing is selected with bit zero of the SMA2 register. For more
details refer to Section 1.2 of the AM335x Technical Reference Manual.

(11) The 0(PU) indicates that this terminal is initially low based on the description in the AM335x Technical Reference Manual. However, it is also has a weak internal pull up applied.

(12) The input voltage thresholds for this input are not a function of VDDSHV6. Please refer to the DC Electrical Characteristics section for details related to electrical parameters associated

with this input terminal.

(13) The internal USB PHY can be configured to multiplex the UART2_TX or UART2_RX signals to this terminal. For more details refer to USB GPIO Details section of the AM335x Technical

Reference Manual.

(14) The internal USB PHY can be configured to multiplex the UART3_TX or UART3_RX signals to this terminal. For more details refer to USB GPIO Details section of the AM335x Technical

Reference Manual.

(15) This output should only be used to source the recommended crystal circuit.

(16) This parameter only applies when this USB PHY terminal is operating in UART2 mode.

(17) This parameter only applies when this USB PHY terminal is operating in UART3 mode.

(18) This terminal is a analog input used to set the switching threshold of the DDR input buffers to (VDDS_DDR / 2).

(19) This terminal is a analog passive signal that connects to an external 49.9 ohm 1%, 20mW reference resistor which is used to calibrate the DDR input/output buffers.

(20) This terminal is analog input that may also be configured as an open-drain output.

(21) This terminal is analog input that may also be configured as an open-source or open-drain output.

(22) This terminal is analog input that may also be configured as an open-source output.

(23) This terminal is high-Z when the oscillator is diasabled. This terminal is driven high if RTC_XTALIN is less than VIL, driven low if RTC_XTALIN is greater than VIH, and driven to a

unknown value if RTC_XTALIN is between VIL and VIH when the oscillator is enabled. The oscillator is disabled by default after power is applied.

(24) This terminal is high-Z when the oscillator is diasabled. This terminal is driven high if XTALIN is less than VIL, driven low if XTALIN is greater than VIH, and driven to a unknown value if

XTALIN is between VIL and VIH when the oscillator is enabled. The oscillator is enabled by default after power is applied.

(25) This terminal is not defined until all the supplies are ramped.

(26) This terminal requires two power supplies, VDDA3p3v_USB0 and VDDA1p8v_USB0. The "*" character in the power supply name is a wild card that represents "3p3v" and "1p8v".

(27) This terminal requires two power supplies, VDDA3p3v_USB1 and VDDA1p8v_USB1. The "*" character in the power supply name is a wild card that represents "3p3v" and "1p8v".

(28) Refer to section 6.2.2 for additional details about VSS_OSC.

(29) Refer to section 6.2.2 for additional details about VSS_RTC.

(30) This power rail is connected to VDD_CORE in the ZCE package.

(31) This terminal provides a Kelvin connection to VDD_MPU. It can be connected to the power supply feedback input to provide remote sensing which compensates for voltage drop in the

Copyright © 2011–2015, Texas Instruments Incorporated

Terminal Configuration and Functions

49

Submit Documentation Feedback

Product Folder Links:

AM3359 AM3358 AM3357 AM3356 AM3354 AM3352

Summary of Contents for Sitara AM335x

























































































































































































































































Reviews:

No comments

Related manuals for Sitara AM335x

GE D20MX User Manual preview
D20MX
Brand: GE Pages: 146
TC Electronic DB6 User Manual preview
DB6
Brand: TC Electronic Pages: 174
TC Electronic Finalizer Express User Manual preview
Finalizer Express
Brand: TC Electronic Pages: 33
Vivotek NR8401 User Manual preview
NR8401
Brand: Vivotek Pages: 136
DAQ system PCIe-FRM13 User Manual preview
PCIe-FRM13
Brand: DAQ system Pages: 41
DAQ system PCIe-SER01 User Manual preview
PCIe-SER01
Brand: DAQ system Pages: 19
IDT DBP 7+4 User Manual preview
DBP 7+4
Brand: IDT Pages: 93
Seattle Computer Products 8086 CPU Instruction Manual preview
8086 CPU
Brand: Seattle Computer Products Pages: 31
Noraxon TeleMyo 2400T V2 User Manual preview
TeleMyo 2400T V2
Brand: Noraxon Pages: 52
DPS Telecom D-PK-NG432 User Manual preview
D-PK-NG432
Brand: DPS Telecom Pages: 80
Patterson Homecraft Rolyan AA6240 Instruction Sheet preview
Homecraft Rolyan AA6240
Brand: Patterson Pages: 2
ZALMAN CNPS9700 LED User Manual preview
CNPS9700 LED
Brand: ZALMAN Pages: 8
V7 SCREENSHARE PRO User Manual preview
SCREENSHARE PRO
Brand: V7 Pages: 4
Intel 80C186EC Manual preview
80C186EC
Brand: Intel Pages: 57
ADF Web AXIS HD67555 User Manual preview
AXIS HD67555
Brand: ADF Web Pages: 20
Emerson Liebert ISWEBRT3 User Manual preview
Liebert ISWEBRT3
Brand: Emerson Pages: 28
Emerson PACSystems IC695CPE400 Quick Start Manual preview
PACSystems IC695CPE400
Brand: Emerson Pages: 37
Emerson Dixell iChill ICX207D Quick Reference Manual preview
Dixell iChill ICX207D
Brand: Emerson Pages: 20

Brands by name

Popular brands

Load more brands