Installation Guide
I-2-5
2.3
Installation guide
This section describes the EDMA3 LLD installation and un-installation.
2.3.1
Installation and Usage Procedure
1) Install the products mentioned in the development tools requirements section, as
per instructions provided along with the products.
2) Install the EDMA3 package using the self-extracting installer into preferred
drive/folder. It is recommended to install the EDMA3 LLD into the default
drive/folder as indicated by the self-extracting installer.
3) As
a
part
of
installation
process,
an
environment
variable
“EDMA3LLD_BIOS5_INSTALLDIR” is created with its value as the current EDMA3
installation directory. Moreover, in case the variable exists prior to this
installation, the same will be updated with the current (latest) EDMA3 installation
directory. This environment variable can be used by other users of EDMA3
package for e.g. BIOS PSP Drivers package.
4) For building the downloadable images, refer to section 2.4 – Integration Guide.
5) Download the image (.out) onto the platform using CCS.
6) Run the program.
2.3.2
Un-installation
1) Uninstall the EDMA3 package by using the uninstall.exe in the install directory.
2) Un-install the products mentioned in the development tools requirements section
as per the instructions provided with the product.
Summary of Contents for EDMA3
