![background image](http://html1.mh-extra.com/html/texas-instruments/drv8811/drv8811_user-manual_1095243021.webp)
Windows Application
21
SLVA344C – July 2009 – Revised July 2019
Copyright © 2009–2019, Texas Instruments Incorporated
Laser and Motor Drives
When the motor is commanded to stop, the inverse of the description above occurs.
The Windows Application frame to control speed, acceleration and deceleration, as well as motor start and
stop, looks as portrayed in
Figure 31. Speed Control Frame
Pressing the Start Steps button, will start the timer and pulses will be generated at the rate specified by
the decimal number at the PPS text box. Once the Start Steps button is pressed it becomes the Stepping
button. Press the Stepping button to stop the stepper motion.
When the motor is stepping, the Update Speed button becomes enabled. Speed can be updated by
modifying the PPS text box and then pressing the Update Speed button. The Update Speed button is
disabled every time the motor is not turning because the stepping has been halted by pressing the
Stepping button.
3.5.2
Step by Step control
The Step Control frame has a series of tools to control the stepping of the motor on a predetermined
number of steps fashion.
The Pulse Step button allows for a single step to be issued. At the same time, the STEP Control check
box allows the control of the STEP signal in the same fashion that other GPIO signals on the Signals
frame could be set and cleared. Checked stands for HI and unchecked for LO. Remember that a STEP
takes place when STEP goes from LO to HI.
Figure 32. Step Control Frame
To move the motor a number of steps and then stop, fill the # of Steps text box with a decimal number
from 0 to 65535 and the motor will move that number of steps at the speed specified on the PPS text box.
No acceleration or deceleration takes place under this function.