DAC1006/1007/1008 — Simple Hookup for a “Quick Look”
(Continued)
6.0 DIGITAL CONTROL DESCRIPTION
The DAC1006 series of products can be used in a wide va-
riety of operating modes. Most of the options are shown in
Table 1. Also shown in this table are the section numbers of
this data sheet where each of the operating modes is dis-
cussed. For example, if your main interest in interfacing to a
µP with an 8-bit data bus you will be directed to Section
6.1.0.
The first consideration is “will the DAC be interfaced to a µP
with an 8-bit or a 16-bit data bus or used in the stand-alone
mode?” For the 8-bit data bus, a second selection is made
DS005688-49
FIGURE 12. Full Scale Adjust — Current Switching with Bipolar Output Voltage
DS005688-50
FIGURE 13. Full Scale Adjust — Voltage Switching with a Unipolar Output Voltage
DS005688-15
FIGURE 14. Voltage Switching with a Bipolar Output Voltage
www.national.com
14
PrintDate=1998/11/17 PrintTime=11:38:09 46711 ds005688 Rev. No. 4
cmserv
Proof
14
