5.1
CDCE62005 Control User Interface
5.2
Using the EVM Control Software
Installing the EVM Control Software and USB Driver
www.ti.com
Figure 2. TI CDCE62005 EVMCS Display
The graphical layout of the EVMCS is based on the functional structure of the CDCE62005. Using the
EVMCS, the system designer can change the Input Frequency, Input Divider, Input type, Input selection,
PFD Charge Pump, Internal/External Loop Filter, Output MUX selection, Output Divider, and Output type.
Other configurations are selected by the software with user-selectable options as described in the steps
below. If the CDCE62005EVM is USB powered, the “Enable EVM Power” check box must be checked. If
the CDCE62005 is powered from an external source, the “Enable EVM Power” check box must be
unchecked.
4
Low Phase Noise Clock Evaluation Module — up to 1.5 GHz
SCAU024 – September 2008
