FT4232
(USB to Serial
Interface)
ADC12DL3200
LMX2582
(PLL/VCO ADC
clock source)
400 pin
SEARAY
TM
(LVDS Data
Connector)
LM95233
(Temperature
Monitor)
4
SLAU776 – May 2018
Copyright © 2018, Texas Instruments Incorporated
Introduction
Preface
SLAU776 – May 2018
Introduction
The ADC12DL3200 evaluation module (EVM) is used to evaluate the ADC12DL3200 analog-to-digital
converter (ADC) from Texas Instruments. Throughout this document, the terms evaluation board,
evaluation module, and EVM are synonymous with the ADC12DL3200EVM.
The ADC12DL3200 is a dual-channel, 12-bit ADC, capable of operating at sampling rates up to 3.2 Giga-
samples per second (GSPS) in dual-channel mode, or 6.4 GSPS in single-channel mode. The
ADC12DL3200EVM device output data is transmitted over a high-speed LVDS interface. This evaluation
board also includes the following important features:
•
Transformer-coupled signal input network allowing a single-ended signal source from 500 kHz to
9 GHz
•
The LMX2582 clock synthesizer generates the ADC sampling clock
•
Transformer-coupled clock input network to test the ADC performance with an external low-noise clock
source
•
LM95233 temperature sensor
•
Device register programming through USB connector and FTDI USB-to-SPI bus translator
