Open the HSDC Software and Load the FPGA Image to the TSW14DL3200EVM
13
SLAU776 – May 2018
Copyright © 2018, Texas Instruments Incorporated
Setup Procedure
2.11 Open the HSDC Software and Load the FPGA Image to the TSW14DL3200EVM
1. Open the HSDC Pro software.
2. Click
OK
to confirm the serial number of the TSW14DL3200EVM device. If multiple TSWxxxxx boards
are connected, select the model and serial number for the one connected to the ADC12DL3200EVM.
3. If using the ADC12DJ2700EVM or the ADC12DL3200EVM, select the ADC12DJxx00_JMODE0 device
from the ADC select drop-down menu in the top left corner. If using the ADC08DJ3200EVM, select
ADC12DJxx_JMODE5.
4. When prompted, click
Yes
to update the firmware.
NOTE:
If the user configures the EVM with options other than the default register values, different
instructions may be required for selecting the device in HSDC Pro. See
for more
details.
5. Enter the ADC Output Data Rate (ƒ
(SAMPLE)
) as
5400M
or the desired output sample rate. This number
must be equal to the actual sampling rate of the device, and must be updated if the sampling rate
changes.
