Open the ADC12DL3200EVM GUI and Program the ADC and Clocks
11
SLAU776 – May 2018
Copyright © 2018, Texas Instruments Incorporated
Setup Procedure
2.9
Open the ADC12DL3200EVM GUI and Program the ADC and Clocks
The device configuration GUI is installed separately from the HSDC Pro installation and is a stand-alone
GUI.
shows the GUI open to the
EVM
tab. Tabs at the top of the panel organize the configuration
into device and EVM features, with user-friendly controls and a low-level tab for directly configuring the
registers. The EVM has three configurable devices: the
, and
. The
register map for each device is provided in the device data sheets.
Figure 2-2. Configuration GUI: EVM Tab
1. Open the ADC12DJxx00EVM GUI.
2. Select the onboard clock as the clock source.
3. Select Fclk = 3200 MHz as the onboard Fclk selection.
4. Select
nonDES_ForegroundCal
operating mode.
5. Click
Program Clocks and ADC
. This action overwrites any previous device register settings.
