Texas Instruments ADC DJ 00RF Series, User Manual

Page: 26 / 32

B Jumpers and LEDs
10.1 Jumper settings
Table 10-1 shows the jumper settings and Table 10-2 shows the LED functionality.
Table 10-1. Jumper Settings
Label Description Function
J12 ADC power down jumper. Installed: ADC powered down. Uninstalled: ADC powered up(default)
J13 Select the source for Reference clock signal
Installed: External Reference clock signal is selected(default).
Uninstalled: Onboard reference signal (LMK61E2) is selected.
J18
When hardware calibration trigger option is enabled.
The ADC's calibration routine is can be enable using
external signal
Installed: ADC's calibration routine is triggered. Uninstalled: ADC's
calibration routine is not triggered(default).
J19 Selects the source for SPI signals
Installed: SPI signals from FMC+ connector are controlling the
devices on the EVM. Uninstalled: SPI signal from the onboard FTDI
IC is controlling the devices on the EVMs
Table 10-2. LEDs
Label Function
D1 High temp indicator
D2 High input power on channel A
D3 High input power on channel B
B Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision * (April 2019) to Revision A (June 2021) Page
• Changed the abstract to include additional devices........................................................................................... 1
• Added a Note to Open the ADC12DJ5200RFEVM GUI and Program the ADC and Clocks ............................. 8
Jumpers and LEDs www.ti.com
26 ADCxxDJxx00RF Evaluation Module SLAU640A – APRIL 2019 – REVISED JUNE 2021
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated