22
Firmly hold the frame handles and push down the machine body, moving the shearing
mouth towards your expected direction scale, pushing in and fix the handle when
you finish adjusting.
To ensure operation safety, when you want to switch to a different snow exit angle or
direction, please call attention of nearby vehicles and passengers to avoid potential incidents.
Firmly hold the frame handles and push down the machine body.
Slightly pull the direction control lever upwards and turn to the expected
snow exit direction.
Slightly pull the direction control lever upwards and turn the
lever moving to its central position, making the plates shift
towards the centre.
Slightly pull the direction control lever upwards and turn
the lever moving downwards, making the plates shift to
the left.
Slightly pull the direction control lever upwards and turn
the lever moving upwards, making the plates shift to the
right.
Warnings!
During your work, when you need to check or clean the deposited snow blocks, please remember to turn off
the power switch and disconnect the power cable from the socket. Otherwise, you may start the engine
unintentionally which may cause serious personal injury.
During your operation, do NOT push the machine with much force or intentionally apply load to the engine.
During your operation, always be cautious about nearby passengers, vehicles, gates, windows and obstacles
etc. Small rocks may lie in the snow and may fly out to cause personal injury. It is recommended that you pick
out these small rocks before operation.
