16
9.Please be sure to use the machine in a safe place.
DO NOT use the machine in a place nearby flammable fluids,
coal gas or liquefied gas.
10.Special care should be drawn to the following issues when
using this machine:
Operation methods, procedures, surroundings and
environment states, etc.
11.When using the machine, the user should be cautious about
the nearby status or changes
The user should constantly observe the position and
movement of other people, nearby windows, vehicles,
obstacles, etc.
Exercise caution to find any small pieces of rocks or other
articles in the snow to avoid them from flying out and
causing personal injury.
12.In case of the following conditions, please turn off the machine
and pull out the power plug:
When not used, being repaired, replace of some parts, being
cleaned and checked, as well as any other conditions in
which dangerous factors exist.
13.The machine must NOT be turned on unintentionally or by
mistake. Therefore, when moving or transporting the machine,
the power cable should not be plugged into the socket, the power
switch should not be pushed down to avoid potential damages.
14.When using the machine the user must keep correct
postures.
Heels should be placed firmly on the ground, while the
hands hold the handles firmly.
15.When replacing parts, original parts or products must be
used.
If the user uses uncertified parts or products, it may
cause damages or personal injury which should be
avoided.
16.In case a lengthening cable should be used, certified
cables with a water-proof feature should be selected and
used, with a rated current of 8A or higher.
When a lengthening cable is used, due to its current
factors, the maximum output power may not be
reached.
17.The user should wear protective goggles when operating
the machine.
18.Before using the machine, the user should have a careful
inspection of the main machine
Carefully check the different parts of the machine before
starting, solving any problem immediately. If you find any
abnormal condition, please don t use the machine before
repairing.
