Tetan KP 12-ES, Service And Operation Manual

Page: 77 / 80

76
Menu
No.: Menu - name Menu – description-meaning Settings - values Alloved
MAIN MENU unit
KP 12S,
KP 12 - ES
KP 22S,
KP 22 - ES
KP 62S,
KP 62 - ES
3.3.2 Ignition Menu for ignition parameters setting
Use electrical ignition Button for activation of electrical ignition (If set OFF boiler is working in Stand By mode) - ON ON ON
service
Ignition feeding time Ignition feeding time (feeder F1) – fuel for ignition Sec 90 90 40
producer
Fan delay after start Time electrical ignition (preheating) without fan Sec 60 60 60
producer
Primary fan level in ignition Primary fan level in ignition % 30 30 32
producer
Control temperature Minimum temperature difference exhaust and boiler water in the end ignition °C 10 10 10
producer
Reignition enable Permit
repetition
ignition in case wrong ignition - button - OFF OFF OFF
service
Exhaust fan enable Exhaust fan enable - button - OFF OFF OFF
service
Exhaust fan level in ignition Exhaust fan level in ignition - button % - - -
service
Maximum ignition time Maximum ignition time (activation electrical heating elements) Min 15 15 15
producer
Burn on time after ignition Time for stabilization of fire Min 2 2 2
producer
Feeding time in burn on Feeding time (feeder F1) for stabilization of fire Sec 5 5 5
producer
Ignition is running in burn on state Time spiral activation - during stabilisation of fire Min 1 1 1
producer
Stabilization time after burn on Time for prolong of stabilization of fire Min 2 2 3
producer
Aplication time during burn on Aplication time during burn on – additional fuel for burn on Min 0 0 0
producer
Start program after ignition Start program after ignition - 3 3 3
producer
3.3.3 Standby mode Menu Standby mode parameters setting
Standby time
Time period, in which automatic boiler is not actively burning
Min 45 45 15
producer
Time fire life Time fire life Min 0 0 0
producer
Boiler standby temperature Temperature - desired output °C
in accordance with
the settings
in accordance with
the settings
in accordance with
the settings
user
Feeder 2 run out in standby Feeder 2 run out in standby Sec 60 60 60
producer
Maximal burnout time fan Maximal burnout time fan Min 1 1 1
producer
Stop the fan in burnout at Stop the fan in burnout at % 25 25 25
producer
Feeding worktime in standby Feeding workintime in standby Sec 5 7 5
producer
Feeding breaktime in standby Feeding breaktime in standby Sec 60 60 38
producer
Number of cycles Number of cycles - 2 2 3
producer
Primary fan if feeding in standby Primary fan if feeding in standby % 30 30 30
producer
Exhaust fan if feeding in standby Exhaust fan if feeding in standby % 0 0 0
producer
3.3.4 Programs Menu programs parameters setting
Program number Button – No. Program for setting parameters
Program No.1
30% of nominal boiler power
Feeder 1 on Time for feeding of fuel (feerder 1) Sec 5 5 4
producer
Feeder 1 off Breaktime of feeder 1 Sec 90 60 30
producer
Primary fan Primary fan settings % 30 30 30
producer
Exhaust fan Exhaust fan settings % 0 0 0
producer