PARTS OF THE ELECTRIC PRESSURE COOKER
1
Top cover release button
2
Blue safety float valve
3
230 V power cord
4
Pressure release valve lever
5
Lid handle
6
Plastic stopper
7
Top cover
8
Stainless steel inner pot
9
Condensation cup
10
Inner pot
11
Hole for top cover layout
12
Handle for gripping the appliance
13
Upper circle
14
Control panel
15
Body of appliance
16
Heating element
17
Sensor
18
Bottom of appliance
BEFORE THE FIRST USE
1.
Remove all packaging materials.
2.
Clean the lid cover with a damp, soapy cloth. Do not immerse the pot cover in water. Wash the
sealing cap, silicone sealing ring in warm, soapy water. Thoroughly rinse and dry the parts.
3.
CAUTION!
Never pour water into the pressure cooker and immerse the power cord into water.
Always make sure the inner stainless steel pot is completely dry before placing it in the pressure
cooker body.
4.
After initial cleaning, reattach the top lid of the pot, install the ring with a silicone seal and a metal
filter. When attaching the metal filter, secure it through all three retaining clips. Then push it into
place until you hear the click sound.
5.
Place the plastic condensate container on the back of the pot.
HOW TO OPEN PRESSURE COOKER
Move the valve to „
Venting
“. Grasp the lid firmly, press the blue release button „
OTEVŘÍT - OPEN
“
and turn it counterclockwise. Nevertheless, a slight vacuum may occur in the pot, so you can also
raise the inner stainless steel container with the lid.
Summary of Contents for EliteCook K70
Page 1: ...TESLA EliteCook K70...
Page 38: ......
