4.1.3 GeoView Data Interface
Switching to data view changes the bottom three quarters of the screen only, with all
icons and menus still available while in the data view or calendar view. To switch back to
the calendar view, select the
calendar
tab directly above the displayed date. Below this
you will see the data view window and we will now get familiar with this part of the
interface.
fe
Figure 65: GeoView Data View
Directly below the
Measure data
and
Calendar
tabs is where you will start to notice the
changes to the interface. The displayed date has two buttons on either side of it.
These two buttons allow for you to move forwards and backwards through the
calendar while remaining in the data view display.
Please note:
Only days that contain
data for the serial number shown will be viewable. To the right of the date you will see a
pull down menu which contains a serial number list of unit’s with data being displayed. If
you have data from other units on the same day this is where you would change between
the different units. Pull the menu down with a left click of the mouse and all serial
numbers that contain data for that day will be displayed. Select the serial number you
wish to view the data for, with a left click of the mouse.
66
