The process to load a calibration curve is outlined on page 109. To begin using the
preloaded calibration table, select it from the list and return to the main menu. The KT-10
v2 will remember the last table selection made upon restart.
Figure 132: Table type notified
On the measurement screen (
Figure 132
), a number in the upper left hand corner of the
display is used to indicate which calibration table is currently being used.
Legend used to notify current calibration table in use:
1
= Magnetite [%]
2
= User1 [%]
3
= User2 [%]
There will be no number shown in the notification area when the Basic SI is selected as
the unit of measurement.
The procedure to take a reading is described in the in this user’s manual and the quick
user guide.
When a calibration table is used, the measurements are presented to the user as
percentage with average and standard deviation displayed on the bottom line (
Figure
133
).
Figure 133: Calibrated Percentage Display
108
