When the option
Conc. tables
has been selected, the user will be presented with an
option to select a list of calibration tables for susceptibility or conductivity
(Figure 130)
.
Figure 130: Conc. Tables Sub menu
Select the appropriate measurement mode (
Figure 130
) to reveal the installed calibration
tables for that mode.
Figure 131: Susceptibility - Calibration tables
The first unit of measurement, Basic [SI], is used to obtain magnetic susceptibility
measurements in SI units. Under this selection, measurements are displayed and stored
in SI units.
Selecting Magnetite [%] will enable the unit to read iron ore concentration estimates as a
percentage. This calibration table is based on magnetite with different concentrations.
The next two selections, User1 [%] & User2 [%], remain open to be populated by the end
user. Please note that these two tables are currently populated with the same table used
for magnetite.
107
