TMS-UT-0114-T01-1
3.0 General requirements
3.1. Contents included in delivery
Termo Extra, Termo Blok and Termo Blok PTV boilers are delivered pre-mounted in a package unit.
Make sure that all parts have been delivered intact. For the exact list of parts see the figure and table
below. If parts are damaged or missing, please consult our local sales office.
Contents included with delivery
Item
Quantity
Description
1
1
Termo Extra / Termo Blok / Termo Blok PTV boiler
2
1
Instructions for installation
Instructions for use
Electrical drawing
Warranty card
3
1 (2)
Hanging bracket
4
1
External temperature sensor (optional)
5
1
Water cylinder temperature sensor (optional)
Table of contents included with delivery
Note:
Item 3 has quantity of two for Termo Extra boilers with power greater than 36 kW
Item 4 is only delivered for Termo Extra boilers with options C, W and Termo Blok boilers with option C.
Item 5 is only delivered for Termo Extra boilers with option W and Termo Blok PTV boilers.
In the case of boilers with the power of 6/7 kW, additional jumpers are provided in order to enable single
phase power supply connection for the boiler.
3.2 Preliminary remarks
When connecting the appliance to the fixing wiring, the means for disconnection (MCB) must be
incorporated in fixing wiring in accordance with the local wiring rules.
Safety valve is not mounted on Termo-extra boilers in factory, but it is provided in the package. If
safety valve (0,25 MPa) is not located in the existing installation, safety valve provided must be
installed.
If the boiler is not connected to room thermostat (Termo boilers without C or W option) or boiler is out
of function during winter time, there is a danger of installation freeze. In this case the should be filled
with antifreeze liquid for central heating, if this is not possible water should be drained out of the
system with the help of charge and discharge.
Page 14