Terex Genie Z-45/25J Bi-Energy, Operator'S Manual

Page: 58 / 69

Operator's Manual
Eighth Edition • First Printing
Transport and Lifting Instructions
56 Z
®
-45/25J Part No. 1311642GT
Transport and Lifting Instructions
Observe and Obey:

Genie provides this securement information as
a recommendation. Drivers are solely
responsible for making sure machines are
properly secured and the correct trailer is
selected pursuant to US Department of
Transportation regulations, other localized
regulations, and their company policy.

Genie customers needing to containerize any
lift or Genie product should source a qualified
freight forwarder with expertise in preparing,
loading and securing construction and lifting
equipment for international shipment.

Only qualified mobile elevating work platform
operators should move the machine on or off
the truck.

The transport vehicle must be parked on a
level surface.

The transport vehicle must be secured to
prevent rolling while the machine is being
loaded.

Be sure the vehicle capacity, loading surfaces
and chains or straps are sufficient to withstand
the machine weight. Genie lifts are very heavy
relative to their size. See the serial label for
the machine weight. See the inspections
section for the serial label location.

Be sure the turntable is secured with the
turntable rotation lock before transporting. Be
sure to unlock the turntable for operation.

Do not drive the machine on a slope that
exceeds the uphill, downhill or side slope
rating. See Driving on a Slope in the Operating
Instructions section.

If the slope of the transport vehicle bed
exceeds the uphill or downhill maximum slope
rating, the machine must be loaded and
unloaded using a winch as described in the
brake release operation. See the
Specifications section for the slope ratings.
Free-wheel Configuration for
Winching
Chock the wheels to prevent the machine from
rolling.
2WD models: Release
the non-steer wheel
brakes by turning over
the drive hub
disconnect caps.
4WD models: Release
the wheel brakes by
turning over all four
drive hub disconnect
caps.
Disengage
Engage
Be sure the winch line is properly secured to the
drive chassis tie points and the path is clear of all
obstructions.
Reverse the procedures described to re-engage
the brakes.
Note: Towing the Genie Z-45/25J is not
recommended. If the machine must be towed, do
not exceed 2 mph / 3.2 km/h.