Terex Genie Z-45/25J Bi-Energy, Operator'S Manual

Page: 55 / 69

Eighth Edition • First Printing
Operator's Manual
Operating Instructions
Part No. 1311642GT Z
®
-45/25J 53
Machine Not Level Indicator Light
If the tilt alarm sounds when the
platform is raised, the Machine Not
Level indicator light will come on
and the drive function in one or
both directions will not operate.
Identify the condition of the boom
on the slope as shown below.
Follow the steps to lower the boom
before moving to a firm, level
surface. Do not rotate the boom
while lowering.
If the tilt alarm sounds
with the platform uphill:
1 Lower the primary
boom.
2 Lower the
secondary boom.
3 Retract the primary
boom.
If the tilt alarm sounds
with the platform
downhill:
1 Retract the primary
boom.
2 Lower the
secondary boom.
3 Lower the primary
boom.
4
Engine Idle Select (rpm)
When the foot switch is not pressed, the engine
will idle at the lowest rpm.
•
Turtle symbol: Foot
switch activated low idle
•
Rabbit symbol: Foot
switch activated high idle
If foot switch activated low idle or high idle do not
work, contact service personnel within 24 hours.
Foot switch activated idle settings are disabled by
certain fault codes.
Check Engine Light
Light on and engine stopped: Tag
the machine and remove from
service.
Light on and engine still running:
Contact service personnel within
24 hours.
Platform Overload Indicator Light
Light flashing indicates the
platform is overloaded. The
engine will stop and no
functions will operate.
Remove weight from the
platform until the light goes off
and then restart the engine.