Terex Genie Z-45/25J Bi-Energy, Operator'S Manual

Page: 54 / 69

Operator's Manual
Eighth Edition • First Printing
Operating Instructions
52 Z
®
-45/25J Part No. 1311642GT
Drive Enable
Light on indicates that the boom
has moved just past either non-
steer wheel and the drive
function has been interrupted.
To drive, hold the drive enable switch to either side
and slowly move the drive control handle off
center.
Be aware that the machine may move in the
opposite direction that the drive and steer controls
are moved.
Always use the color-coded direction arrows on
the platform controls and the drive chassis to
identify the direction the machine will travel.
To Position Platform
1 Press down the foot switch.
2 Slowly move the appropriate function control
handle or toggle switch or press the
appropriate button according to the markings
on the control panel.
Drive Speed Select
•
Machine on incline symbol: Low range
operation for inclines
•
Machine on level surface symbol: High range
operation for maximum drive speed
Tilt Sensor Activation Settings
Model Chassis Angle
(side to side) Chassis Angle (front
to back)
Z-45J IC 4.5° 2.5°
When the Machine On Incline
indicator light is on and the tilt
alarm sounds, the following
functions are affected; drive
functions are disabled.
Follow the Boom lowering
procedure (see Operating
Instructions) to restore drive
function.
While operating from the platform
with the machine on the out of
stowed position, on a slope, and
the tilt alarm sounds. The
following functions are affected: lift
functions are disabled.
Follow the Boom lowering
procedure (see Operating
instruction) to restore lift function.
Generator (if equipped)
To start the generator, move
the generator toggle switch to
the on position.
Plug a power tool into the
power to platform GFCI outlet.
To turn off the generator, move the generator
toggle switch to the off position.
Note: Machine functions will not operate while the
generator is running and the foot switch is not
pressed down. When the foot switch is pressed
down, the generator will turn off and the machine
functions will operate.