Terex Genie Z-45/25J Bi-Energy, Operator'S Manual

Page: 33 / 69

Eighth Edition • First Printing
Operator's Manual
Controls
Part No. 1311642GT Z
®
-45/25J 31
11 Aircraft protection override switch (if equipped)
Move and hold the aircraft protection override
switch to operate the machine when the
platform bumper is against an object.
12 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions and turn the
engine off. Pull out the red Emergency Stop
button to the on position to operate the
machine.
13 Dual axis proportional control handle for drive
and steer functions.
OR
Proportional control handle for drive function
and thumb rocker for steer function.
Move the control handle in the direction
indicated by the blue arrow on the control
panel and the machine will drive forward.
Move the control handle in the direction
indicated by the yellow arrow and the machine
will drive backwards. Move the control handle
in the direction indicated by the blue triangle
and the machine will steer to the left. Move the
control handle in the direction indicated by the
yellow triangle and the machine will steer to
the right.
OR
Move the control handle in the direction
indicated by the blue arrow on the control
panel and the machine will drive forward.
Move the control handle in the direction
indicated by the yellow arrow and the machine
will drive backwards. Press the left side of the
thumb rocker and the machine will steer to the
left. Press the right side of the thumb rocker
and the machine will steer to the right.
14 Drive enable indicator light
Light on indicates that the boom has moved
just past either non-steer wheel and drive
function has been interrupted.
15 Drive enable switch
To drive when the drive enable light is on, hold
the drive enable switch to either side and
slowly move the drive control handle off
center. Be aware that the machine may move
in the opposite direction that the drive and
steer controls are moved.
16 Diesel models: Glow plug switch
Move the glow plug switch to either side and
hold for 3 to 5 seconds.
Or for models with LCD readout screen, light
on indicates that glow plugs are on. Start
engine when light goes off.
17 Engine idle (rpm) select switch
Move the engine idle select switch to the turtle
position for foot switch activated low idle.
Move the engine idle select switch to the rabbit
position for foot switch activated high idle.
18 Engine start switch
Move the engine start switch to either side to
start the engine.
19 Models with LCD screen: Engine shut-down
indicator light
Light on indicates that the engine has shut
down. Contact service personnel.