Terex Genie Z-45/25J Bi-Energy, Operator'S Manual

Page: 32 / 69

Operator's Manual
Eighth Edition • First Printing
Controls
30 Z
®
-45/25J Part No. 1311642GT
Platform Control Panel
1 Horn button
Press this button and the horn will sound.
Release the button and the horn will stop.
2 Platform level switch
Move the platform level
switch up and the level
of the platform will raise.
Move the platform level
switch down and the
level of the platform will
lower.
3 Platform rotate switch
Move the platform rotate
switch to the right and the
platform will rotate to the
right. Move the platform
rotate switch to the left
and the platform will rotate
to the left.
4 Jib boom up/down switch
Move the jib boom switch
up and the jib boom will
raise. Move the jib boom
switch down and the jib
boom will lower.
5 Platform overload indicator light
Light flashing indicates the platform is
overloaded. The engine will stop and no
functions will operate. Remove weight until the
light goes off and then restart the engine.
6 Machine not level indicator light
The machine not level indicator light will come
on when the tilt alarm sounds.
7 Auxiliary power switch
Use auxiliary power if the primary power
source (engine) fails.
Simultaneously hold the auxiliary power switch
to either side and activate the desired function.
8 Drive speed select switch
Machine on incline symbol: Low range
operation for inclines.
Machine on level surface symbol: High range
operation for maximum drive speed.
9 Platform control box heater (if equipped)
Move the heater switch up to turn on the
platform control box heater. Move the heater
switch down to turn off the platform control box
heater.
10 Generator switch (if equipped)
Move the generator switch up to activate the
generator. Move the switch down to turn off
the generator.