Operator's Manual
First Edition • Third Printing
Work Area Safety
16
S
®
-40/45 XC
™
• S
®
-40/45
HF • S
®
-40/45 TRAX
™
Part No. 1274724GT
S-40 XC, S-45 XC, S-40 TRAX, S-45 TRAX:
If the
platform load is greater than 660 lbs/300 kg, do
not move the platform into the unrestricted range
of motion zone.'
Do not exceed the maximum platform capacity.
S-40 XC, S-45 XC, S-40 TRAX, S-45 TRAX:
Do
not attach a platform rated at 660 lbs/300 kg
(unrestricted range of motion) or 1000 lbs/454 kg
(restricted range of motion) to machines with any
other rated load. See the serial label for the
maximum rated load.
S-40 HF, S-45 HF:
Do not attach a platform rated
at 600 lbs/272 kg (unrestricted range of motion) to
machines with any other rated load. See the serial
label for the maximum rated load.
The weight of options and accessories such as
pipe cradles and welders will reduce the rated
platform capacity, and must be subtracted from the
platform capacity. See the decals with the options
and accessories.
If using accessories, read, understand and obey
the decals, instructions and manuals with the
accessory.
Do not raise or extend the
boom unless the machine
is on a firm, level surface.
Do not depend on the tilt alarm as a level indicator.
The tilt alarm sounds in the platform only when the
machine is on a severe slope.
Summary of Contents for Genie S-40 HF
Page 90: ......
