Page
D-14
Document 57.0007.0200 - 01/2006
MAINTENANCE
Handler with telescopic boom
GTH-4013
■
D-3.9
CHANGING THE HYDRAULIC OIL
To change the hydraulic oil, proceed as follows:
1
Stop the machine on a level ground and make sure
the parking brake is engaged.
2
Release the pressure from the hydraulic circuit.
3
Place a container of suitable size under the drain
plug, placed in the lower part of the reservoir, and
collect any oil leaks.
4
Remove the drain plug
and allow oil to flow out
into the container.
5
Remove the inspection cover of tank
.
6
Carefully wash the tank with Diesel oil and blow a
jet of compressed air.
7
Refit the drain plug and the inspection cover.
8
Add new oil by making sure that it matches the
recommended type indicated in
paragraph D-
5.2.2
until it is level with
.
SERVICE INTERVAL
Running-in ____________________________
None
Ordinary ________________
Every
1000
hours
Summary of Contents for Genie GTH-4013
Page 2: ......
