Page
C-12
Document 57.0007.0200 - 01/2006
OPERATING INSTRUCTIONS
Handler with telescopic boom
GTH-4013
■
C-3.2.6
Speed controls
13 Mechanical gearbox pushbutton
Used to engage the 1
st
or 2
nd
gear.
Push the button to select the required
speed.
Each pressure corresponds to the
selection of a new speed.
ATTENTION
Do not change gear when the machine is running.
IMPORTANT
When a gear is not correctly put, the warning light
7.14 comes on (
see C-3.3.2
).
■
C-3.2.7
Steering mode selection
6 Steering mode switch
Three-position switch for the selection
of the steering mode:
1
Crab steering
0
Two-wheel steering
2
Four-wheel steering
■
C-3.2.8
Cab/road/platform switch
33 Switch
Three-position switch:
1
Rotate the switch to position
1
to
select the job-site setting and ope-
rate the handler by the cab controls
2
Rotate the selector switch to
position
0
to select the road setting
3
Rotate the switch to position
2
to
remove the ignition switch key and
operate the handler by the platform
controls. The green light indicator
lights up.
1
0
2
1
0
2
P
0
5
10
15
30
25
20
RPM x 100
Summary of Contents for Genie GTH-4013
Page 2: ......
