Terex Genie AL5HT, Service Manual

Page: 41 / 94

May 2015 Service Manual
Checklist D Procedures
Part No. 1265482 AL5HT 31
D-1
Perform Engine Maintenance
Engine specifications require that this procedure be
performed every 50 hours or weekly, whichever
comes first.
Required maintenance procedures and additional
engine information is available in the Kubota
D1105-E and V1505-E Operator's Manual (Kubota
16683-89169 part number ).
Kubota D-1105 and V-1505 Operator's Manual
Genie part number 893020
D-2
Check the Tower Rotation
Bearing Bolts
Engine specifications require that this procedure be
performed every 1000 hours or annually,
whichever comes first.
Note: Terex requires that this procedure be
performed every 1000 hours or annually,
whichever comes first.
Maintaining proper torque on the tower rotation
bearing bolts is essential to safe machine operation.
Improper bolt torque could result in an unsafe
operating condition and component damage.
1 Lower all four outriggers to the ground and
level the machine.
2 Remove the tower transport lock pin.
3 Raise the tower to a vertical position.
4 Check to be sure that each tower mounting
bolt is torqued in sequence to specification.
Refer to Section 2, Specifications.