Terex 340210/1350, Service Manual

Page: 50 / 64

5 Installation of generator
48 (60)
Version 11.08.2008 12.65-SA10403-en-110808
340-1560-12.65-54
1 3
2
4
Magnet cable over boom (view: service ladder; right)
ƒ
Slightly open all hose brackets (2).
ƒ
Lay the magnet cable (1) over the boom to
the dipperstick.
ƒ
At the transition to the dipperstick, guide
the magnet cable to the center of the stick
(4).
ƒ
Fasten the magnet cable on the hydraulic
hose and the line with cable ties (3) later.
ƒ
Close the hose bracket later.
340-1560-12.65-XX 340-1560-12.65-72
1
3
4
2
Magnet cable on dipperstick (front view)
ƒ
Slightly open the hose bracket (2).
ƒ
Lay the magnet cable (1) further to the
center on the dipperstick (3).
ƒ
Fasten the magnet cable on the hydraulic
hose with cable ties (4) later.
ƒ
Close the hose bracket later.
340-1560-12.65-XX 340-1560-12.65-73
4
1
5
3
2
Magnet cable in the upper dipperstick area (front view)
ƒ
Slightly open the hose brackets (3) and
(5).
ƒ
Lay the magnet cable (1) behind the lines
(4) in loops so that there is enough length
remaining to connect the coupler socket
later.
ƒ
Set the hose clamp (2) in place and guide
the magnet cable through the hose
bracket (3) to the clamp and then further
down.
ƒ
Fasten the magnet cable with cable ties
later.
ƒ
Close the hose bracket later.