EN
47
E
N
37878
05-2017
4
.
M
ai
n
te
n
an
ce
a
n
d
c
le
an
in
g
4.6
Trouble shooting
Alarm message 69 to 84
ã
Terberg Machines B.V., IJsselstein, The Netherlands
All rights reserved. No part of this book may be reproduced, stored in database or retrieval system, or published, in any form or in any way,
electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher.
69: RIDING HANDLE
OUT
Riding handle is open / unfolded.
For bin lifts with footboards and riding handles only.
Fold away the riding handle if you want to empty
bins.
70: ADJUST ERROR LH
MOVE LIFTER DOWN
Zero adjust error, VDH9013 weighing system only.
Move lifting chair down and retry.
71: ADJUST ERROR RH
MOVE LIFTER DOWN
72: FOOTBOARD ERROR
INPUTS R/L NOT SAFE
L/H or R/H footboard inputs have been detected
to be in a non-safe situation.
Make sure nobody is on the footboards when the
bin lift is powered up.
Check footboard sensors.
73: TMDW8010->TMOPEN
NO COMMUNICATION ERR
When on the TMDW8010 CAN weight module
the TMOpen protocol is enabled and the client is
not responding on the TMDW8010 TMOpen
communication port, this alarm message is genera-
ted.
74: MOVE STOP L/H
CYLINDER ERROR
2-Wheel domestic bin mode active.
Bin lift is below 50% position and tilting of L/H
chair is not in a safe position, only down movement
is possible. First try to correct the tilting position.
75: MOVE STOP R/H
CYLINDER ERROR
2-Wheel domestic bin mode active.
Bin lift is below 50% position and tilting of R/H
chair is not in a safe position, only down movement
is possible. First try to correct the tilting position.
76: MOVE STOP TRD
CYLINDER ERROR
4-Wheel trade container mode active.
Bin lift is below 50% position and tilting of L/H or
R/H chair is not in a safe position, only down
movement is possible. First try to correct the tilting
position.
77: DE3 IN TRADE
CALIBRATION ACTIVE
OmniDEKA bin lift with a 2-position switch instead
of a push button to change 2-wheel domestic to 4-
wheel trade container mode.
When calibration mode is activated this message
appears on the display.
Before calibration can be activated we have to
change to 2-wheel domestic mode.
78:
Not used.
79: WEIGHING ZERO ERR
TRADE IS ACTIVE
VDH9013 dynamic zeroing activated while the bin
lift is in 4-wheel / trade mode.
Dynamic zeroing is not possible in 4-wheel mode.
Switch the bin lift into 2-wheel mode before doing
a zero adjust.
80: FOOTBOARD
STOP LEFT HAND
L/H footboard is occupied and this is an unsafe
situation. Bin lift is stopped.
Do not stand on the footboards when you operate
the bin lift.
81: FOOTBOARD
STOP RIGHT HAND
R/H footboard is occupied and this is an unsafe
situation. Bin lift is stopped.
82: READY DYN ZERO
WEIGHING L/H
VDH9013 weighing dynamic zeroing successful
done for the L/H side.
83: READY DYN ZERO
WEIGHING R/H
VDH9013 weighing dynamic zeroing successful
done for the R/H side.
84: SERVICE
REQUIRED
For electric bin lifts only:
Service interval date reached.
The bin lift has reached its service interval date
and requires maintenance.
This message will start to appear just prior to the
date, if the maintenance is not done within 6
months after the maintenance date the bin lift will
go into “limp” mode to prevent possible damage.
Please contact your local Terberg dealer for more
details.
