EN
33
E
N
37878
05-2017
4
.
M
ai
n
te
n
an
ce
a
n
d
c
le
an
in
g
4.2
Maintenance: weekly
ã
Terberg Machines B.V., IJsselstein, The Netherlands
All rights reserved. No part of this book may be reproduced, stored in database or retrieval system, or published, in any form or in any way,
electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher.
• Working of the controls
Check the working of all controls by carrying out
all possible actions with the bin lift using empty
bins/containers:
-
Emergency stop switches
-
Manual operation functions
-
Automatic functions
-
Catcherbar (works automatically)
-
Shaking functions
• Bin security switch and mechanical pedal arm
-
Check the spring action and the springs of the
bin security switches and pedal arms.
• Under walk protection (RPD)
-
Check the working of the safety arms and
under walk protection (RPD)
• DIN pick-up arms
-
Check the working of the mechanical chair lock
(only present with the pick-up arms and
Terberg TMDW weighing system options).
-
Check that the fall down locks close in the
tipping position.
• Decals
-
Damaged safety and instruction decals must be
immediately replaced.
• Lubricate the bin lift
The bin lift is provided with 10 greasing nipples
(see fig. 4.2a).
-
The 4 greasing nipples ( ) for the main axles
can be reached with the chairs in the tipped
position. Press the emergency stop button and
support the chairs safely against lowering again
when working under the chairs (hoist, props
etc.).
The 4 greasing nipples ( ) for the lifting cylin-
der axles can be reached with the chairs in the
lowest position. The top one via the side wall.
The catcherbar mechanism is provided with
2 greasing nipples ( ), position subject to
change.
-
Remove the red protective caps and clean the
greasing nipples. Add grease until you can see
new grease between the pivot points.
-
Only use qualified acid-free grease types that
do not affect the bearings, such as Texaco
Multifak EP2 (or equivalent).
Springs
Any faults identified must be rectified before
the bin lift is put into service.
Grease nipples
Fig. 4.2a
The OmniDEKA can be optionally fitted with a
centralised greasing system. This system supplies
grease to all greasing points. The central greasing
point is located on the left hand side of the bin lift.
-
This greasing point must be greased on a week-
ly base. Apply 5 strokes of grease (≥10 cc).
•
Visual checks
-
Check that the teeth of the pick-up comb are
aligned correctly.
-
Check the fixing and condition of rubber stops,
warning edges and protective screens/windows.
-
Check the dust suppression curtains (tarpaulin)
for tears.
-
Check the bin lift for defective parts (warped,
bent or broken).
-
Check for oil leaks.
-
Check the wiring for any damage.
