TCG140_R1.1 – May 2018
Page 27
8.
Setup via SMS
TCG140
supports SMS commands for parameters change and status reports, including firmware
update over the air. The commands will be executed if they come from previous set 5 phone number.
For every command needs different rights.
Below is a list of the supported SMS commands. Note that the
underscore character “
˽
” must be
replaced by one space character.
Set new master number
Rights:
Master
Syntax:
set˽master˽<number>
Where
<number> is a mobile number in the international format
Example
Command:
set 359885885885
Answer:
You are the new master!
Set SMS users numbers -
this message is used to add/delete SMS users
Rights:
Master
Syntax:
set˽sms˽user˽<user>:<number>
Where
<number> is a mobile number in the international format
<user> can be u1, u2, u3 or u4
Example
Command:
set sms user u1:+359885887766
Answer:
u1:+359885887766,u2,u3,u4
Command:
set sms user u2:+359885999888
Answer:
u1:+359885887766, u2:+359885999888,u3,u4
Command:
set sms user u1:
Answer:
u1, u2:+359885999888,u3,u4
Display SMS users numbers
Rights:
Master, Users
Syntax:
display˽sms˽users
Example
Command:
display sms users
Answer:
m:+359885885885,u1:+359885887766,u2:+359885999888,u3,u4
Set email users -
this message is used to add/delete email users
Rights:
Master
Syntax:
set˽email˽user˽<user>:<email>
Where
<email> - a valid email address
<user> can be e1, e2, e3, e4 or e5
Example
Command:
set email user e1:[email protected]
Answer:
Command:
set email user e2:[email protected]
Answer:
Command:
set email user e2:
Answer:
e2:
Display email users
- this message is used to request the email of a user
Rights:
Master, Users
Summary of Contents for TCG140
Page 1: ......
Page 47: ...TCG140_R1 1 May 2018 Page 47 Appendix C Fig 1 Fig 2 ...
