TCG140_R1.1 – May 2018
Page 23
The section for some general settings.
The temperature and pressure units can be changed with preferable ones.
Writing mode change the alignment in the WEB interface and SMS.
Hostname, System name, System location, and System contact are sent in XML/JSON files and
can be used for flexible identification of the device. These parameters can be also included in
the body of the e-mails.
The checkboxes on the right define what to see on the “Monitoring page”. By default, they all
are enabled.
7.2.6.
NTP
Internal RTC (real-time clock) of the controller can be set either manually or automatically.
For automatic clock synchronization, the controller supports NTP (Network Time Protocol) and all
necessary parameters for automatic synchronization are available in this section.
The clock synchronization is made on “Interval” time. If the attempt was not successful, the next
synchronization will be on “If not found” time.
Pressing the “Save and synchronize” button initiate time synchronization. The information for
“Status” in the blue box is very useful for the availability of time server and Internet at all.
The current system time is sent in XML/JSON file when HTTP Post is enabled
By default, NTP synchronization is disabled, server – time.google.com:123, Timezone 00.00 and
interval of 12 hours.
Summary of Contents for TCG140
Page 1: ......
Page 47: ...TCG140_R1 1 May 2018 Page 47 Appendix C Fig 1 Fig 2 ...
