TCG140_R1.1 – May 2018
Page 36
12.
Factory default settings
TCG140
can be restored to its original factory default settings by following the steps:
Turn off the power supply;
Press and hold the RESET button then turn on the power supply;
STA and SIG LEDs will turn ON;
Release the RESET button.
The controller will restore its default settings.
13.
Environment information
This equipment is intended for use in a Pollution Degree 2 environment, at altitudes up to 2000
meters. When the controller is a part of a system, the other elements of the system shall comply with
the EMC requirements and shall be intended for use in the same ambient conditions.
14.
Safety
This device must not be used for medical, life-saving purposes or for any purpose where its failure
could cause serious injury or the loss of life.
To reduce the risk of fire, only flexible stranded wire, with cross section 0.5mm² or larger for wiring of
digital and analog inputs and relay output of the device should be used.
To avoid electric shock and fire hazard, do not expose this product to liquids, rain, or moisture. Objects
filled with liquids, such as vases, should not be placed on this device.
There is a risk of overheating (damage) of controller, if recommended free spaces to adjacent devices
are not ensured. Joint part with external component shall have space for attachment/removal of the
cable after installation.
Teracom does not guarantee successful operation of the product if the product was used under
conditions deviating from the product specifications.
15.
Maintenance
Upon completion of any service or repairs to the device or once per year, safety check must be
performed to determine that this product is in proper operating condition. Clean the device only with
dry cloth. Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning
device (dust remover) or any kind of abrasive materials to clean the device.
16.
Package content
The box contains:
TCG140
GSM antenna
Quick start guide
Summary of Contents for TCG140
Page 1: ......
Page 47: ...TCG140_R1 1 May 2018 Page 47 Appendix C Fig 1 Fig 2 ...