TCG140_R1.1 – May 2018
Page 18
For every relay, a description, up to 15 characters can be set. These descriptions will appear in
the monitoring page, XML/JSON data, SMS and e-mail alerts.
The pulse duration can be different for every relay. The resolution is 0.1 second, the maximum
pulse value is 3600 seconds.
Both relays can be activated either remotely by SMS/single call/HTTP API or locally from the
status of a monitored parameter. This setting is made from the “Activated from” drop-down
menu, the possible options are:
SMS/HTTP
- by selecting this option the relay outputs can be activated by SMS from
authorized number or by sending HTTP API commands;
Phone call -
by selecting this option the relay outputs can be activated (pulse only) by
a single call from an authorized number.
For local activation, alarm conditions for different sources are used. They are set up in section
“Setup->Conditions”. To assign a parameter to the relay, following choices are possible:
S?
– “S” stands for “
S
ensor 1-Wire”. The relay is activated from the value measured
from specified 1-Wire sensor and rules for ranges specified in “Setup->Conditions”.
Question mark masks a number from 1 to 8;
Analog input?
. The relay is activated from the value measured by specified analog
input and rules for ranges specified in “Setup->Conditions”. Question mark masks a
number from 1 to 4;
Digital input?
. The relay follows the state of the specified digital input. Question
mark masks a number from 1 to 2;
All changes in above sections are saved by pressing the “Save” button.
Summary of Contents for TCG140
Page 1: ......
Page 47: ...TCG140_R1 1 May 2018 Page 47 Appendix C Fig 1 Fig 2 ...
