GB
E
ng
lish
Instruction Manual
Multi Synergic 250 - Multi Synergic 380 - Multi Synergic 500 and Accessories
13. ACCESSORIES
The Multi synergic series has the capability to recognise the accessory connected and
install it. The external wire feeder can be connected trough the interconnecting cable
and the machine recognise it and switch from internal control to wire feeder control
just using the torch switch or with a simple touch in the wire feeder or machine control.
The interconnecting cable is recognised in its impedance and automatically the pa-
rameter make a compensation in order to grant the same results also with different
length of the cables.
Digital torches, MIG or TIG can be installed also in a second time, the process recog-
nise their presence and start to work in the SMART mode.
Water cooling unit can be installed with a simple operation to put the power source
over it and connect the cable. The process recognise it and start to drive the water
cooler in MIG or TIG, only during the welding and control the flow rate of the cooling
liquid. Remote control as manual or foot control can be connected in the front of the
machines and gives the adjustment in the main parameter without any extra setting
by the user. Digital remote control can be connected in the wire feeder, they work in
simple way,giving to the user a powerful extra control up to a smart interface to me-
chanical automatised applications.
14. MAIN FEATURES MULTI SYNERGIC 280 :
The base machine includes the trolley and the bottle support, water cooling cannot
be used in the Multi Synergic 280, the accessories as external wire feeder and inter-
connecting cable can be used at any time as expansion. The other accessories as
digital torches and DRC can be connected at any time.
Three phase multifunction
developed for light in-dustri-
al applications. The base
machine is equipped with
robust digital controlled wire
feeder built in, the trolley and
ro-bust gas bottle support.
Especially appreciate in the
synergic MIG-MAG applica-
tions with fast mig characteristic and for its easy to use au¬to-learning front panel.
Offer also the very often used pulse mig programs for aluminium wire 1,2mm, stain-
less steel 1,0 mm, mild steel 1,0 mm and silicon bronze 0,8 mm for these applica-
tions that needs something more, (the base program use the plus concept technol-
ogy with double pulse capability).
Page. 05
