GB
E
ng
lish
Instruction Manual
Multi Synergic 250 - Multi Synergic 380 - Multi Synergic 500 and Accessories
ADJUST THE SECOND LEVEL PARAMETER
With the forth push button select the other
welding parameter and adjust, with the second
knob, to the desired value PRE GAS; POST
GAS, icons light on and the Second display
shows the value.
SELECT THE TORCH SWITCH CYCLE:
With the fifth push button select the torch
switch Cycle. If the timer cycle is selected, than
the time is adjustable with the selection trough
the forth Push button
24. MIG-MAG MANUAL
ADJUST THE THE PARAMETERS:
During the welding, the real voltage and real Current are
shown in the two display, adjust the voltage and wire
speed up to the optimal transfer Occurs . The induc-
tance has important rules in the Welding result, adjust
it as fine control.
SELECT MIG-MAG IN MANUAL:
With the first push button, select MIG With the
second push button select MANUAL With the
main knob, adjust the welding voltage
The main display shows the preset voltage
SELECT MIG-MAG IN MANUAL:
With the second knob, adjust the WIRE SPEED
The second display shows the preset speed.
ADJUST THE WELDING DYNAMIC:
With the forth push button is possible to select the
Inductance icon, the display shows the preset val-
ue Between 1 to 20 ( 20 is maximum inductance
value) Adjust the inductance according to the ap-
plication.
1
2
3
4
5
6
Page. 15
