GB
E
ng
lish
Instruction Manual
Multi Synergic 250 - Multi Synergic 380 - Multi Synergic 500 and Accessories
In this example, the down slope synergic value
is increased of 6%.
The value is stored in the internal memory.
22. SYNERGIC TIG SETTING
SELECT SYNERGY TIG OR PULSE MODE:
With the first push button, select TIG or TIG
PULSE with the second push button select the
material in welding.
COMPLETE THE TIG SYNERGY SELECTION:
with the third push button select the diameter
of the tungsten electrode of the tig torch.
From this time all the adjustment are automati-
cally done from the synergy selection.
Adjust the welding current , in the little display
The value of the suggested thickness of the
welding material is proposed. The selection
of the Torch switch cycles is the same of the
manual setting.
The second level parameters change as the set
current change giving ever the optimal value.
If the expert user need to increase or decrease
the synegic value of one of these values, push
the forth push button and select the value to
be changes.
1
2
3
4
Once selected the value that need to be
changed, Use the second knob to adjust.
The little display, shows the correction value in
% That can increase or decrease up to 100%
the current synergic value.
5
6
Page. 13
