sensitive, so you should avoid stimulating them. Probes with long
electrodes (the metal part) that run up and down the length of the
attachment should always be inserted with the metal parts facing hip-
to-hip.
6. After your training session, switch the control unit off, then remove
the probe by holding the positioning end ring and gently pulling
outwards.
CLEANING
It is important that the probe is cleaned after each use. Clean with either
an alcohol-free antibacterial wipe such as TensCare Wipes (see X-
WIPES) or by wiping with warm soapy water. Rinse and dry thoroughly
and return the unit to the storage pouch.
Warning:
Do not immerse the probe in a liquid.
DISPOSAL
Clean thoroughly and dispose of according to local regulations.
TECHNICAL SPECIFICATIONS
Material: Electrode body: Plastic ABS PA-757
Electrodes: Stainless steel #304
Cables: PVC over copper tinsel conductor
“In Use” product lifetime: 6 months
