tennat NOBLES S6, Technical & Service Manual

Page: 45 / 57

November 30, 2020
45
of
58
PLDC04348
REVISION 00
November 09, 2020
TECHNICAL OFFICE
User Programming
Versions with 115 V
AC
/ 230 V
AC
Power Supply
B
C
D
A
PROCEDURE
1
Switch the machine on using the ON-OFF button A and (with no functions active) press the DISPLAY button B
and hold it for at least 5 seconds, the display will show the first parameter - P1.0.
2
To increase the value press the SUCTION button C , while to decrease the value press the FILTER SHAKER
button D .
3
To move to the next parameter, press the DISPLAY button
B
, the display will then show P2.1, SF3 etc. in a cycle
back to P1.0.
4
To save the changes and exit, press for at least 5 seconds the DISPLAY button
B
, or hold it until the display
shows the battery voltage.
5
To exit without saving the changes, press the ON-OFF button
A
until the display switches off.
Parameter Indications and Available Values
P1.X
Brush pressure program 1 with value X from 0 to 5. It is not recommended to change the default value.
P2.X
Brush pressure program 2 with value X from 0 to 5. It is not recommended to change the default value.
SF.X
Filter shaker activation frequency with value X from 0 to 9. Modifiable according to customer needs.
SF.0
MANUAL filter shaker activation.
SF.1
AUTOMATIC filter shaker activation every 60 seconds.
SF.2
AUTOMATIC filter shaker activation every 120 seconds.
SF.3
AUTOMATIC filter shaker activation every 180 seconds.
SF.4
AUTOMATIC filter shaker activation every 240 seconds.
SF.5
AUTOMATIC filter shaker activation every 300 seconds.
SF.6
AUTOMATIC filter shaker activation every 360 seconds.
SF.7
AUTOMATIC filter shaker activation every 420 seconds.
SF.8
AUTOMATIC filter shaker activation every 480 seconds.
SF.9
AUTOMATIC filter shaker activation every 600 seconds.
DEFAULT VALUES
P1.0
P2.1
SF3