PLDC04348
REVISION 00
November 09, 2020
TECHNICAL OFFICE
November 30, 2020
14
of
58
A1.5 Replacing the centre brush motor
Disassembly
1
Move the machine onto flat and dry flooring.
2
Make sure that there is enough room around the machine to perform the dismantling operations safely.
3
If necessary, clean the working area with a jet of compressed air, or a vacuum cleaner.
4
Remove the battery.
5
Identify the white connector of the brush motor and disconnect it.
6
Position the machine on its left side and undo the 2 screws of the right lateral guard.
7
Shift the right bottom guard downwards.
8
Undo the 2 hex head screws securing the motor to the mounting. Shift the motor toward the centre brush so as to
slacken off the drive belt.
9
Remove the motor and pulley, separating the belt from the pulley groove.
5
6
8
7
To free the motor completely, either cut the wires and fit two Faston clips for the subsequent
reconnection, or remove the pins directly from the connector.
G
Reassembly
1
To reassemble, repeat the disassembly operations in reverse order.
2
Remove the pulley from the old motor and fit to the replacement motor.
3
Apply threadlocker to the 2 screws securing the motor to the mounting. Check that the direction of rotation of the
brush is correct.
Summary of Contents for NOBLES S6
Page 2: ......
Page 4: ...PLDC04348 REVISION 00 November 09 2020 TECHNICAL OFFICE...
