MAINTENANCE
355 MM300 (3--95)
70
TO REPLACE MAIN BRUSH
1. Stop the engine and set the machine parking
brake.
FOR SAFETY: Before leaving or
servicing machine; stop on level
surface, set parking brake, turn off
machine and remove key.
2. Raise the main brush.
3. Open the right side main brush access door.
4. Unlatch and remove the brush idler plate.
5. Grasp the main brush; pull it off the brush
drive plug and out of the main brush
compartment.
6. Put the new or rotated end-for-end main
brush on the floor next to the access door.
7. Slide the main brush onto the drive plug.
Rotate the brush until it engages the drive
plug, and push it all the way onto the plug.
8. Slide the main brush idler plate plug onto the
main brush.
9. Latch the idler plate onto the machine frame.
10. Close the right side main brush access door.
08016
08017
08018
Summary of Contents for 335
Page 1: ...355 MM300 Operator Manual ...
