MAINTENANCE
355 MM300 (6--93)
72
To decrease the width of the main brush
pattern, turn the main brush down pressure
knob clockwise.
If the main brush pattern is tapered, more
than 15 mm (0.5 in) on one end than the
other, adjust the taper with the taper
adjustment bracket at the drive end of the
brush.
A. Loosen the bracket mounting bolts.
B. Turn the taper adjustment nut
counter-clockwise to increase the
pattern width at the brush drive end,
and clockwise to decrease the pattern
width at the brush drive end. Tighten
the mounting bolts.
C. Check the main brush pattern and
readjust as necessary. Then adjust the
width of the main brush pattern.
07788
00601
08216
08215
Summary of Contents for 335
Page 1: ...355 MM300 Operator Manual ...
