Tennant 275 Series II, Operator'S Manual

Page: 132 / 132

APPENDIX
275 SERIES II MM190 (12---89)
4-4
HYDRAULIC FITTING INFORMATION
HYDRAULIC TAPERED PIPE FITTING (NPT)
TORQUE CHART
NOTE: Ratings listed are when using teflon thread
seal.
Minimum Maximum
Size Torque Torque
______________________________________________________________
1/4 NPT 10 ft lb (14 Nm) 30 ft lb (41 Nm)
1/2 NPT 25 ft lb (34 Nm) 50 ft lb (68 Nm)
3/4 NPT 50 ft lb (68 Nm) 100 ft lb (136 Nm)
HYDRAULIC TAPERED SEAT FITTING (JIC)
TORQUE CHART
Tube Thread Maximum
O.D. (in) Size Torque
______________________________________________________________
0.25 0.44---20 9 ft lb (12 Nm)
0.38 0.56---18 20 ft lb (27 Nm)
0.50 0.75---16 30 ft lb (41 Nm)
0.62 0.88---14 40 ft lb (54 Nm)
0.75 1.12---12 70 ft lb (95 Nm)
1.0 1.31---12 90 ft lb (122 Nm)
HYDRAULIC O--RING FITTING TORQUE CHART
Tube Thread Minimum Maximum
O.D.(in) Size Torque Torque
______________________________________________________________
0.25 0.44---20 6 ft lb (8 Nm) 9 ft lb (12 Nm)
0.38 0.56---18 13 ft lb (18 Nm) 20 ft lb (27 Nm)
*10 ft lb (14 Nm) 12 ft lb (16 Nm)
0.50 0.75---16 20 ft lb (27 Nm) 30 ft lb (41 Nm)
*21 ft lb (28 Nm) 24 ft lb (33 Nm)
0.62 0.88---14 25 ft lb (34 Nm) 40 ft lb (54 Nm)
0.75 1.12---12 45 ft lb (61 Nm) 70 ft lb (95 Nm)
1.0 1.31---12 60 ft lb (81 Nm) 90 ft lb (122 Nm)
NOTE: Do not use sealant on o---ring threads.
*Aluminum bodied components