MAINTENANCE
3-17
140E MM156 (6--91)
TO REMOVE DUST FILTER
1. Place the master power switch in the “off”
position.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, And Turn Off
Machine And Remove Key.
2. Push the filter shaker pushbutton to shake
the excess dust from the dust filter.
3. Unlatch the two filter cover latches and
lower the rear filter cover.
A
B
01214
LOWERING REAR FILTER COVER
A. Rear Filter Cover
B. Filter Cover Latch
4. Slide the filter retention bar up and out of the
slotted retention brackets.
B
A
01215
REMOVING FILTER RETENTION BAR
A. Filter Retention Bar
B. Retention Bracket
5. Push the filter retention spring upward and
slide the filter out of the filter compartment.
TO INSTALL DUST FILTER
1. Push the filter retention spring upward and
slide the filter into place on the filter base in
the filter compartment.
B
A
02667
INSTALLING FILTER
A. Filter
B. Filter Housing
NOTE: Make sure the arrows on the filter are
pointing to the front of the machine.
2. Release the filter retention spring.
3. Slide the filter retention bar down into the
slotted retention brackets.
4. Lift the rear filter cover back into the
“operating” position.
5. Latch the two filter cover latches.
Summary of Contents for 140E
