OPERATION
2-9
140E MM156 (6--91)
TO DUMP HOPPER
1. Stop the motor.
WARNING: Brush Throws Debris. Stop Motor
Before Lifting Hopper.
2. Grasp the hopper handles with both hands.
3. Lift and swing the hopper upward to remove
the hopper from the machine.
01196
REMOVING HOPPER
4. Dump the debris out of the hopper into
suitable refuse container.
5. Tip the hopper down and slide it into place
on the machine.
POST OPERATION CHECKLIST -- MOTOR
OPERATING
Check brush patterns for width and evenness.
TO STOP MACHINE
1. When finished sweeping, place the main
brush lift handle and the side brush arm in
the “raise” position.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, And Turn Off
Machine And Remove Key.
2. Stop the motor.
POST OPERATION CHECKLIST -- MOTOR
STOPPED
Check the batteries state of charge. Charge if
needed.
Check skirts for damage, wear, and adjustment.
Check for wire or string tangled on brushes.
Summary of Contents for 140E
