www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <24>
V1.0
26/04/18
The temperature measurement ranges have ″-20°C to 150°C″ and ″0°C to 400°C″ to choose. The overlap temperature of the
two ranges Is more accurate to choose ″-20°C to 150°C″.
The ambient temperature, humidity and reflection temperature are Important for radiometric temperature measurement.
Thermal Imager has temperature compensation for these values. To get more accurate temperature measurement, accurately
set the ambient temperature, humidity and reflection temperature. In most cases, the reflected temperature is identical to
the ambient temperature. Only when objects with strong emissions with much higher temperature are in the proximity of the
object being measured, the reflected temperature is different of the ambient temperature and must set the temperature of
environment.
Press ″Measure setting″ to popup the submenu of Measure Setting. ″Lens″ display current optical infrared lens; ″Range″ sets the
range of temperature measurement; ″Env″ sets ambient temperature; ″Humid″ sets humidity; ″Ref″ sets reflected temperature.
Alarm
Thermal Image has alarm function to beep. There are 3 kinds of alarm mode: ″Above″, ″Below″ and ″Equal″. The ″Above″ mode
will start to alarm when temperature Is above to setting temperature; The ″Below″ mode will start to alarm when temperature is
below to setting temperature; The ″Equal″ mode will start to alarm when temperature is equal to setting temperature.
Alarm open and close
Press “Alarm” to open temperature alarm, The Icon ″
″
means to open, The Icon ″ ″ means to close.
Alarm Settings
Press the icon ″ ″ to popup submenu of Alarm Settings.
″
Target
″
:
Sets the target of temperature alarm, there are
3 kinds of choices; Spot 1, Spot 2, Spot 3;
″
Mode
″
:
Sets the alarm mode, ″Above″, ″Below″, ″Equal″.
″
Temp
″
:
Sets alarm temperature value.
7.4 -
Camera Menu
Thermal Imager has photo and video functions. In photo
function, the Imager can save thousands of images. Every
image resolution is 640*480, format is .jpg and stores infrared
data and visible data in an image. In video function, the Imager
has .mp4 video capture for hours, and save infrared data in
.mp4 format.
Note:
Images and video flies are stored In SD Memory Card. Images
can easily be read and second analyzed within Thermal
Imager PC software.
In main menu, press camera icon ″ ″ ,popup Camera Menu
which contains Snapshot Menu and Video Menu. Slide the
rectangle in the icon ″
″ from left to right to switch form
