www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <19>
V1.0
26/04/18
7.2.5 -
Zoom and Rotation
Thermal Imager offers 1-20x continuous zoom and 0°- 360° rotation functions. Press the icon ″
″ which in top-left of the
display, popup the menu of Zoom and Rotation. In the menu of Zoom and Rotation, press the icon, ″
″ Image restores to
its original state, without zoom and rotation. Press the icon ″OK″ or Push HOME ″ ″ button, exit current menu.
Zoom
Press the icon ″
″, image zoom out 10%, long press will
continue to zoom out. Press the icon, ″
″ image zoom in
10%, long press will continue to zoom In. When zoom In or
zoom out, the zoom factor displays in the upper-right comer
of the display.
Rotation
Press the icon ″
″ , image counterclockwise rotates 1°,
long press will continue to rotate and accelerate the speed of
rotation.
Press the icon ″
″ , image counterclockwise rotates 1°,
long press will continue to rotate and accelerate the speed of
rotation.
When rotated an angle, the angle of rotation displays in the
upper-right corner of the display.
7.3 -
Measurement Menu
In main menu, press measurement icon ″
″, popup
Measurement Menu which contains Point Measurement.
Line Measurement. Area Measurement and Measurement
Settings.
Point Measurement:
Measure the selected points, each
point can move, capture maximum temperature and minimum
temperature.
Line Measurement:
Use temperature curve to display the
profile for measured target
Area Measurement:
Measure the selected area, contains
maximum temperature, minimum temperature and average
temperature.
7.3.1 -
Point Measurement
In measurement menu, press the icon ″ ″ ,shows the page of Point Measurement. There are 3 points to measure. Each point
has third kinds of mode: manual mode, maximum temperature capture, minimum temperature capture. Each point can use
global parameter settings or global parameters to set the measuring parameters.
Open and Close
Press Spot 1, Spot 2, Spot 3 to open the corresponding point of the temperature measurement. The Icon ″
″ means to open
point measurement, The Icon ″ ″ means to close point measurement.
