www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <17>
V1.0
26/04/18
Press every scale to popup menu for parameter settings.
Click ″Enable″ to switch on(checked) or off (unchecked). Click
colour bar to choose a colour, ″Current Colour″ shows current
selected colour. ″Red″, ″Green″ and ″Blue″ shows the colour
value of selected colour. Press the left arrow or right arrow can
change the corresponding value. Press ″OK″ button to save
parameter settings, Press ″cancel″ button to cancel parameter
settings.
If ″Enable″ Is switched on (checked), It means to enable linear
gradient in this scale, the icon ″ ″ shows in the top of scale.
If ″Enable″ is switched off (unchecked), it means to disable
linear gradient in this scale, the icon ″ ″ will hide;
7.2.3 -
Image Adjustment
There are 3 kinds of modes for thermal image adjustment they
are All Auto, Histogram, Manual. Press left arrow or right arrow
to change image adjustment
All Auto:
level and span are decided by the thermal image of
minimum temperature and maximum temperature.
Histogram:
level and span are decided by the Histogram of
thermal image temperature.
Manual:
level and span are decided by the manual values,
which decide by ″Max Temp″ and ″Min Temp″, Press the left
arrow or right arrow to change the value.
In image menu, press the icon ″ ″, shows the page of Image
Adjustment.
In Manual mode, press ″Adjust″ to open the menu for the
adjustment of level and span. Press left arrow or right arrow to
change value, press ″Level″ to ″Span″, press ″Span″ to ″Level″.
