Tenda FH456 User Manual Download

Page: 2 / 82

Copyright Statement

Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand

and product names mentioned herein are trademarks or registered trademarks of their respective

holders. Copyright of the whole product as integration, including its accessories and software, belongs

to Shenzhen Tenda Technology Co., Ltd. No part of this publication can be reproduced, transmitted,

transcribed, stored in a retrieval system, or translated into any language in any form or by any means

without the prior written permission of Shenzhen Tenda Technology Co., Ltd.

Disclaimer

Pictures, images and product specifications herein are for references only. To improve internal design,

operational function, and/or reliability, Tenda reserves the right to make changes to the products

without obligation to notify any person or organization of such revisions or changes. Tenda does not

assume any liability that may occur due to the use or application of the product described herein.

Every effort has been made in the preparation of this document to ensure accuracy of the contents,

but all statements, information and recommendations in this document do not constitute the warranty

of any kind, express or implied.

Shortcut of Common Functions

How to access the Internet quickly using the Router?

How to change your WiFi name and password?

How to change your login password?

How to enable/disable your WiFi according to schedule?

How to extend your wireless range?

How to control your Bandwidth?

How to prevent unknown device from connecting to your network?

Summary of Contents for FH456



















































































Search results

Summary of Contents for FH456

Reviews:

Related manuals for FH456

Brands by name

Popular brands

Tenda FH456, User Manual

Search results

Summary of Contents for FH456

Reviews:

Related manuals for FH456

Brands by name

Popular brands