Wireless N300 ADSL2+ High Power Modem Router
93
Here in the
Port Triggering
interface, you can configure the port settings by selecting an existing application or creating
your own (Custom application).
User Interface:
Select the WAN interface you will use to visit the server in your LAN.
Configure the
Application Name >
Select an application
to select an existing application (
Select One
here is only
an express to tell you select one application.) from the drop-down list. And then the corresponding trigger start/end port
will prompt automatically
.
Or configure
Application Name
>
Custom application
to customize an application
manually.
Trigger Protocol:
Select the protocol from the drop-down list. If you are unsure, select TCP/UDP.
Click
Save/Apply
to save configurations.
Other fields’ introduction that may help:
Trigger Port Start/End:
The port range for an application to initiate connections.
Open Port Start/End:
After the application connection is established, the built-in firewall of the router will open ports
between the start port number and end port number automatically.
Application Scenario:
You always use ICQ to communicate with computers on the Internet. You hope your LAN is secure and your instant
communication with other computers can be smoother. The WAN port now is ipoe_eth0.1.
Solution:
