Wireless N300 ADSL2+ High Power Modem Router
4
Back Panel
Button & Interface
Description
DSL
For connecting the router to the Internet via a phone cable provided by your ISP.
1/WAN
LAN port or WAN port. When you access the Internet via the DSL, this port works as a LAN
port which can be used to connect to a PC, switch, or a router; when you access the Internet
via an Ethernet cable from your ISP directly, this port works as a WAN port.
Note
: It works as a LAN port by default.
2/3
LAN port, used to cable the device to the local network devices such as computers.
4/iTV
LAN port or IPTV port. When IPTV feature is disabled, it works as a LAN port which can be
used to connect to a PC, switch or a router; when IPTV feature is enabled, it works as an IPTV
port, and it can only be connected to a set-top box.
Note
: IPTV feature is disabled by default.
USB
Used to connect a USB device, such as a 3G USB modem, USB print server or storage
service.
RST/WPS
Press it for 1-3 seconds to
enable WPS-PBC feature;
Press it for about 10 seconds to restore all configurations to factory defaults.
4/iTV
3/2
1/WAN
Off
No connection established
Blinking
Transmitting data
Solid
Connection is established.
WPS
Solid
Client connected successfully.
Blinking
WPS LED starts blinking if you press the WPS button on the device or interface.
Off
No wireless clients are connected. WPS LED turns off after blinking for 2 minutes.
USB
Solid
Connection is successfully established on the USB port.
Off
Connection is not established on the USB port.
INTERNET
Solid
Current client is connecting to the Internet; no data is transmitted via the Internet.
Blinking
Current client is connecting to the Internet; data is transmitted via the Internet.
Off
Current Internet client is not connecting to the Internet.
